Kia Niro: Wireless Power Charger System / Troubleshooting

Troubleshooting

Wireless Power Charger System Troubleshooting

Trouble status
Inspection item
Inspection
Not charged
Check the mobile phone status
R-1
Amber LED blinks
Overcurrent
R-2
Overheating
R-2
Foreign matter
R-2

R-1. Check the wireless power charger system operation

1.

If the placement of a mobile phone is not detected

(1)

If the internal temperature of the mobile phone battery is high, the mobile phone itself turns "OFF" the power.

  

The temperature at which the power is automatically turned "OFF" differs by mobile phone model.

(2)

If the mobile phone was placed outside the charging range

(3)

If the mobile phone was placed by its LCD side on the charging pad surface (if the phone was placed upside down)

(4)

If the mobile phone was turned 180°

2.

Check that the amber LED of the wireless charging lamp turns on when the mobile phone is in normal condition and is correctly placed.

R-2. Check for overcurrent, overheating and foreign matter

1.

Overcurrent : Charging stops in overcurrent of over 4.5 A

(1)

The overcurrent error status will be reset when the current falls under 4.5 A or when ACC is turned off and on.

2.

Overheating : The unit will be automatically turned "OFF" when the internal temperature of the wireless charging unit is over 158°F (70°C).

(1)

The error status will be reset when the internal temperature of the wirelss charging unit falls under 149°F (65°C).

3.

Foreign matter : When metallic objects such as coins, clips and precious metals are detected, charging will be stopped to prevent overheating.

(1)

Error status will be reset when foreign matter is removed.

  

The amber LED of the charging display lamp blinks 10 times for 10 seconds, and then it is turned off for 50 seconds (total 60 seconds).

The process is repeated for every 60 seconds.

Turning ACC OFF/ON resets the error status and returns to normal operation.

Description and operating principle
Description and Operation Wireless Power Charger System During ACC or IG ON, battery voltage is supplied to the wireless power charger system to transmit an output of 5 W to mobile p ...

Wireless Power Charging Unit Components and positions
Components ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: High voltage shut-off procedures
High Voltage Shut-off Procedures    • Be sure to read and follow the “General Safety Information and Caution” before doing any work related with the high voltage system. Failure t ...

Kia Niro 2017 (DE HEV) Service Manual: ETC (Electronic Throttle Control) System Specifications
Specification [Throttle Position Sensor (TPS)] Throttle angle(°) Output Voltage (V) [Vref=5V] TPS1 TPS2 0 0.5 4.5 10 0.96 4.05 ...

© 2016-2024 www.kniro.net