Kia Niro: Speed setting / To temporarily accelerate with the cruise control on
If you want to speed up temporarily when the cruise control is on, depress the accelerator pedal.
Increased speed will not interfere with cruise control operation or change the set speed.
To return to the set speed, take your foot off the accelerator.
If you move the lever down (to SET-) at increased speed, the cruising speed will be set again.
✽ NOTICE
Be careful when accelerating temporarily, because the speed is not controlled automatically at this time even if there is a vehicle in front of you.
To decrease the crusie control set speed
Follow either of these procedures:
Move the lever down (to SET-), and hold it. Your vehicle set speed will
decrease by 10 km/h (5 mph). Release the lever at the speed you want.
Move the lev ...
Smart cruise control will be temporarily canceled when
Cancelled manually
The smart cruise control is temporarily canceled when the brake pedal is depressed
or the CANCEL button is pressed. The speed and vehicle to vehicle distance indicator
on the ...
Other information:
Kia Niro 2017 (DE HEV) Service Manual: Drive Belt Tensioner Repair procedures
Removal and Installation
1.
Remove the drive belt.
(Refer to Drive Belt System - "Drive Belt")
2.
Remove the mechanical tensioner (A).
Tightening torque :
18.6 - 23.5 N·m (1.9 - 2.4 kgf·m, 13.7 - 17.4 lb ...
Kia Niro 2017 (DE HEV) Service Manual: Rear Door Belt Inside Weatherstrip Repair procedures
Replacement
1.
Remove the rear door trim.
(Refer to Rear Door - "Rear Door Trim")
2.
Remove the rear door belt outside weatherstrip (A) after loosening the
mounting screw.
3.
Install in the reve ...
