1. Press the CRUISE & SPEED LIMIT MODE ( ) button twice on the steering wheel, to turn the system on.
The speed limit indicator light will illuminate.
2. Move the lever down (to SET-).
3. Move the lever up (to RES+) or down (to SET-), and release it at the desired speed. Move the lever up (to RES+) or down (to SET-) and hold it. The speed will increase or decrease by 5 km/h (3 mph).
Move the lever up (to RES+) or down (SET-) and release it immediately. The speed will increase or decrease by 1 km/h.
The set speed limit will display on the instrument cluster.
The set speed limit will be displayed. To drive over the preset speed limit you must depress hard on the accelerator pedal (more than approximately 80%) until the kick down mechanism works with a clicking noise. Then the set speed limit will blink and chime will sound until you return the vehicle speed within the speed limit.
✽ NOTICE
Kia Niro 2017 (DE HEV) Service Manual: Power Window Switch Components and components location
Components
Driver Power Window Switch
[Driver Power Window
Switch (Non-IMS Type)]
Connector Pin Information
[Connector A]
(Driver Safety Power
Switch / Auto Down Power Switch)
No.
Description
No.
Description
...
Kia Niro (DE HEV) Owners Manual: Hitches
✽ NOTICE - Location of trailer mounting
The mounting hole for hitches are located on both sides of the underbody behind
the rear tires.
It's important to have the correct hitch equipment. Crosswinds, large trucks
going by, and rough roads are a few reasons why you’ll need the right h ...