Kia Niro: Cruise Control system / To set cruise control speed

1. Press the CRUISE / button on the steering wheel, to turn the system on. The cruise indicator light will illuminate.

2. Accelerate to the desired speed, which must be more than approximately 30 km/h (20 mph).

3. Move the lever down (to SET-), and release it at the desired speed. The cruise set indicator light will illuminate. Release the accelerator pedal at the same time. The desired speed will automatically be maintained.

On a steep grade, the vehicle may slow down or speed up slightly while going downhill.

Cruise control switch
CANCEL/O : Cancels cruise control operation. CRUISE / : Turns cruise control system on or off. RES+ : Resumes or increases cruise control speed. SET- : Sets or decreases cruise control speed. ...

To increase cruise control set speed
Follow either of these procedures: Move the lever up (to RES+) and hold it.Your vehicle will accelerate. Release the lever at the speed you want. Move the lever up (to RES+) and release it ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Clutch Engagement Fork and Engagement Bearing Repair procedures
Removal 1. Remove the dual clutch assembly. (Refer to Dual Clutch System - "Dual Clutch Assembly") 2. Remove the clutch engagement bearing 1 (A) and 2 (B). 3. Remove the clutch engagement fork 1 (A) ...

Kia Niro 2017 (DE HEV) Service Manual: Fuel Pressure Sensor (FPS) Schematic diagrams
Circuit Diagram Fail-Safe Mode Item Fail-Safe Output Voltage (V) 12    If the fuel pressure sensor malfunctions, it enters fail safe mode. This ...

© 2016-2022 www.kniro.net