Kia Niro: Driveshaft Assembly / TJ Joint Components and components location

Kia Niro 2017 (DE HEV) Service Manual / Driveshaft and axle / Driveshaft Assembly / TJ Joint Components and components location

Components
[LH]

1. BJ assembly
2. BJ circlip
3. BJ boot band
4. BJ boot
5. Dynamic damper band
6. Dynamic damper
7. Shaft
8. TJ boot band
9. TJ boot
10. Spider assembly
11. Retainer ring
12. TJ housing
13. Housing circlip

[RH]

1. BJ assembly
2. BJ circlip
3. BJ boot band
4. BJ boot
5. Dynamic damper band
6. Dynamic damper
7. Shaft
8. TJ boot band
9. TJ boot
10. Spider assembly
11. Retainer ring
12. TJ housing
13.Housing circlip



Front Driveshaft Repair procedures
Removal 1. Remove the wheel and tire. Tightening torque: 107.9 - 127.5 N·m (11.0 - 13.0 kgf·m, 79.6 - 94.0 lb·ft) ...

TJ Joint Repair procedures
Replacement    • Special grease must be applied to the driveshaft joint. Do not substitut ...

Other information:

Peugeot 2008 2019-2022 Owner's Manual: Deactivating the front passenger airbag
Passenger airbag OFF For your child’s safety, the front passenger airbag MUST be deactivated when a "rearward facing" child seat is installed on the front passenger seat. Otherwise, the child would be exposed to the risk of death or serious injury in the event of airbag deployment. Vehicles ...

Kia Niro 2017 (DE HEV) Service Manual: Pre-Charge Resistor Description and operation
Description Built into the Power Relay Assembly (PRA), the Pre-Charge Resistor protects the high voltage circuit by limiting the current while the inverter capacitor is being charged. 1. High Voltage Power Terminal (-) 2. High Voltage Power Terminal (+) 3. ...

© 2016-2022 www.kniro.net