Kia Niro: Tailgate / Tailgate Trim Repair procedures

Replacement
  

Put on gloves to protect your hands.

  

Use a plastic panel removal tool to remove interior trim pieces without marring the surface.

Be careful not to bend or scratch the trim and panels.

[Tailgate upper trim]
1.

Using a remover, remove the tailgate upper trim (A).

2.

Install in the reverse order of removal.

  

Replace any damaged clips.

[Tailgate side trim]
1.

Remove the tailgate trim (A).

2.

Remove the tailgate upper trim (A).

3.

Remove the tailgate side trim (A) after loosening the mounting screw.

4.

Install in the reverse order of removal.

  

Replace any damaged clips.

[Tailgate trim]
1.

Remove the tailgate pull handle caps (A).

2.

Remove the tailgate trim (A) after loosening the mounting screws and clips.

3.

Install in the reverse order of removal.

  

Replace any damaged clips.

Tailgate Trim Components and components location
Component Location 1. Tailgate trim ...

Tailgate Latch Components and components location
Component Location 1. Tailgate latch assembly ...

Other information:

Kia Niro (DE HEV) Owners Manual: Warning type
The system will activate when: 1.The system is on 2.Vehicle speed is above 30 km/h (18.6 mph) 3.Other vehicles are detected in the rear side 1st stage If a vehicle is detected within the boundary of the system, a warning light will illuminate on the outside rearview mirror. If the detected ...

Kia Niro 2017 (DE HEV) Service Manual: Rain Sensor Repair procedures
Removal    • The dust or foreign substance on the rain sensor has a bad effect upon the rain sensor capability, so protect the sensor surface with protection cover until installing th ...

© 2016-2024 www.kniro.net