Kia Niro: Starting the hybrid vehicle (Smart key) / Starting the Hybrid System

1.Carry the smart key into the vehicle.

2.Make sure the parking brake is firmly applied.

3.Place the shift lever in the P(Park) position.

In N (neutral) position, you can not start the vehicle.

4.Depress the brake pedal.

5.Press the engine start/stop button or turn the ignition switch to the ON position.

6.The engine should be started without pressing the accelerator. In extremely cold weather or after the vehicle has not been operated for several days, let the engine warm up without depressing the accelerator.

If the starting procedure is followed, the "READY" symbol on the instrument cluster will turn on. For more details, Please check chapter 6.

Starting the hybrid vehicle (Smart key)
...

ECONOMICAL and SAFE OPERATION of Hybrid system
Drive smoothly. Accelerate at a moderate rate and maintain a steady cruising speed. Don't make "jackrabbit" starts. Don't race between stoplights. Avoid heavy traffic whenev ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: General information
Basic Service Symbols There are five primary symbols used to complement illustrations. These symbols indicate the part to apply such materials during service. Symbol Meaning Do not reuse the part. Replace a new one. ...

Kia Niro 2017 (DE HEV) Service Manual: Safety Plug Description and operation
Description Safety Plug is installed on the rear side of the high voltage battery and it can mechanically shut the high voltage circuit off when servicing the high voltage system (i.e. High Voltage Battery, Power Relay Assembly, HPCU, BMS ECU, Hybrid Drive Motor, Inverter, HSG, LD ...

© 2016-2024 www.kniro.net