Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the crash pad side cover [RH] (A).
|
3. |
Remove the crash pad plate [RH] (A) after loosening the mounting screws.
|
4. |
Disconnect the start/stop button connector (A).
|
5. |
Remove the start/stop button (A) after loosening the mounting screws.
|
Installation |
1. |
Install the start/stop button. |
2. |
Connect the start/stop button connector. |
3. |
Install the crash pad plate [RH]. |
4. |
Install the crash pad side cover [RH]. |
5. |
Connect the negative (-) battery terminal. |
Kia Niro 2017 (DE HEV) Service Manual: ETC (Electronic Throttle Control) System Repair procedures
Inspection
Throttle Position Sensor
(TPS)
1.
Connect the KDS/GDS on the Data Link Connector (DLC).
2.
Start the engine and measure the output voltage of TPS 1 and 2 at C.T.
and W.O.T.
[Throttle Position
Sensor (TPS)]
...
Kia Niro 2017 (DE HEV) Service Manual: Repair procedures
Removal
•
Be sure to read and follow the “General Safety Information and
Caution” before doing any work related with the high voltage system.
Failure to follow the safety instr ...