Kia Niro: Ignition switch position / START

Turn the ignition key to the START position to start the engine. The engine will crank until you release the key; then it returns to the ON position. The brake warning lamp can be checked in this position.

WARNING - Ignition key

ON
The warning lights can be checked before the engine is started. This is the normal running position after the engine is started. Do not leave the ignition switch ON if the engine is not running to ...

Starting the hybrid system
WARNING Always wear appropriate shoes when operating your vehicle. Unsuitable shoes, such as high heels, ski boots, sandals, flip-flops, etc., may interfere with your ability to use the brak ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Specifications
Specifications Purge Control Solenoid Valve (PCSV) ▷ Specification Item Specification Coil Resistance (Ω) 14.3 - 14.7 [20°C(68°F)] Tightening Torques Item kgf·m ...

Kia Niro 2017 (DE HEV) Service Manual: Description and operation
Description Regeneration Brake System During deceleration or braking of an electric vehicle or HEV, the drive motor acts as an alternator and charges the battery by converting the vehicle’s kinetic energy generated during braking into electrical energy. Regenerative braking am ...

© 2016-2024 www.kniro.net