Inspection |
Measuring Resistance |
1. |
Disconnect the cruise control switch connector from the control switch. |
2. |
Measure resistance between terminals on the control switch when each function switch is ON (switch is depressed).
|
3. |
If not within specification, replace switch. |
Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the steering wheel assembly. (Refer to Steering System - "Steering Wheel") |
3. |
Remove the steering back cover (A) after loosening the mounting screws.
|
4. |
Remove the wiring connector (A) from the steering back cover.
|
5. |
Disconnect the steering wheel remote control connector (A). [LH]
[RH]
|
6. |
Remove the steering wheel remote control assembly (A) after loosening the mounting screws.
|
7. |
Remove the steering wheel remote control (A) after loosening the mounting screws.
|
Installation |
1. |
Install the steering wheel remote control. |
2. |
Install the steering wheel remote control assembly. |
3. |
Connect the steering wheel remote control connector. |
4. |
Install the steering back cover. |
5. |
Install the steering wheel and driver airbag module. |
6. |
Connect the negative (-) battery terminal. |
Kia Niro 2017 (DE HEV) Service Manual: Battery Repair procedures
Inspection
Battery Voltage and
Status
Check the battery voltage and status using the battery tester.
Battery Terminal
1.
Move back and forth to check that the battery terminals (A) are loose
or corroded.If the terminals are corroded, clean them.
...
Kia Niro 2017 (DE HEV) Service Manual: Repair procedures
Replacement
•
Be careful not to damage the fender and body.
•
Use a plastic panel removal tool to remove interior trim pieces
without marring ...