Kia Niro: Body Side Molding / Side Sill Molding Repair procedures

Kia Niro 2017 (DE HEV) Service Manual / Body (Interior and Exterior) / Body Side Molding / Side Sill Molding Repair procedures

Replacement

Put on gloves to protect your hands.

•	Use a plastic panel removal tool to remove interior trim pieces without marring the surface.

•	Be careful not to bend or scratch the trim and panels.

1.	Loosen the side sill molding mounting screws.

2.	Using a remover, remove the side sill molding (A).

Install in the reverse order of removal.

Replace any damaged clips.

Waist Line Molding Repair procedures

Replacement Put on gloves to protect your hands. ...

Cowl Top Cover

...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Troubleshooting
Failure Diagnosis 1. In principle, ESP and TCS controls are prohibited in case of ABS failure. 2. When ESP or TCS fails, only the failed system control is prohibited. 3. However, when the solenoid valve relay shoul ...

Peugeot 2008 2019-2023 Owner's Manual: Manual parking brake
Release Pull the parking brake lever up slightly, press the release button, then lower the lever fully. When driving the vehicle, if this warning lamp and the STOP warning lamp come on, accompanied by an audible signal and the display of a message, this means that the parking brake is stil ...