Description |
• |
Side Impact Sensor (SIS) system consists of two Pressure Side Impact Sensor (P-SIS) which are installed at each center of the front door module (LH and RH) and two SIS which are installed at each center pillar nearby (LH and RH) and two rear SIS which are installed in the rear pillar (LH and RH). |
• |
Pressure Side Impact Sensor is also called P-SIS because it detects pressure due to collision at its mounting location. |
• |
Side Impact Sensor is also called A-SIS because it detects acceleration. |
• |
SRSCM decides deployment of the airbag and the time of deployment through the collision signal of the SIS when the collision occurred. |
Kia Niro 2017 (DE HEV) Service Manual: SRS Control Module (SRSCM) Repair procedures
Removal
1.
Remove the battery (-) cable.
Disconnect the battery negative terminal and wait for at least
thirty seconds before beginning work.
...
Kia Niro 2017 (DE HEV) Service Manual: Smart Cruise Control (SCC) ECU Schematic diagrams
Schematic Diagrams
Terminal Function
Pin No.
Terminal Function
1
B+
2
-
3
-
4
Ground
5
-
...