Kia Niro: Airbag Module / Side Airbag (SAB) Module Description and operation
| Description |
The Side Airbags (SAB) are installed inside the front seat and protects the driver and passenger from danger when side crash occurs. The SRSCM determines deployment of side airbag by using Side Impact Sensor (SIS) signal.
Never attempt to measure the circuit resistance of the airbag module (squib) even if you are using the specified tester. If the circuit resistance is measured with a tester, accidental airbag deployment will result in serious personal injury |
Passenger Airbag (PAB) Module Repair procedures
Removal
1.
Disconnect the battery negative terminal, and wait for at least three
minutes before beginning to work.
2.
Remove the glove box ass ...
Side Airbag (SAB) Module Components and components location
Components
1. Side Air Bag (SAB)
...
Other information:
Kia Niro 2017 (DE HEV) Service Manual: Crankshaft Damper Pulley Repair procedures
Removal and Installation
1.
Remove the RH front wheel.
(Refer to Suspension System - "Wheel")
2.
Remove the engine room under cover.
(Refer to Engine and Transaxle Assembly - "Engine Room Under Cover")
...
Kia Niro (DE HEV) Owners Manual: Suitability of each seating position for "universal" category belted Child Restraint
Systems according to ECE regulations
Use Child Restraint System that have been officially approved and are appropriate
for your children. When using the Child Restraint System, refer to the following
table.
U = Suitable for "universal" category Child Restraint Systems approved for use
in this mass group
U* = Suitabl ...
