Kia Niro: Seat Electrical / Seat Heater Switch Description and operation

Kia Niro 2017 (DE HEV) Service Manual / Body Electrical System / Seat Electrical / Seat Heater Switch Description and operation

Description

Seat Heater Smart Control Technology

To prevent low temperature burn, seat heater temperature will automatically be lowered after a certain period of time.

(Low temperature burn condition: Over 30 minutes at 50°C)

Seat Heater Smart Control Operation

[1st Row Seat]

Change to "MID" after 30 minutes in "HIGH", then "LOW" after 60 minutes in "MID"

Change to "LOW" after 60 minutes in "MID"

[2nd Row Seat]

Change to "LOW" after 30 minutes in "HIGH"

  

If temperature is raised manually within certain period of time after the temperature was lowered automatically, it will be lowered again soon to prevent overheating or low temperature burn.

This is normal operating condition as a safety device.

Seat Heater Switch Components and components location
Components Front Seat Switch 1. Driver side seat heater switch 2. Passenger side seat heater switch Rear Seat Switch ...

Seat Heater Switch Schematic diagrams
Circuit Diagram Front Seat Heater Switch Rear Seat Heater Switch ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Front Door Latch Components and components location
Component Location 1. Front door latch ...

Kia Niro 2017 (DE HEV) Service Manual: Rear Lower Arm Repair procedures
Removal 1. Disconnect the battery negative cable. 2. Remove the wheel and tire. Tightening torque: 107.9 - 127.5 N·m (11.0 - 13.0 kgf·m, 79.6 - 94.0 lb·ft) ...

© 2016-2024 www.kniro.net