Kia Niro: SRSCM / Seat Belt Buckle Switch (BS) Repair procedures

Kia Niro 2017 (DE HEV) Service Manual / Restraint / SRSCM / Seat Belt Buckle Switch (BS) Repair procedures

Removal
1.

Disconnect the battery negative terminal, and wait for at least three minutes before beginning to work.

2.

Remove the front seat assembly.

(Refer to the Body - "Front seat")

3.

Loosen the mouting bolt and then remove the seat belt buckle switch.

Installation
1.

Install in the reverse order of removal.

  

If the seat belt is not attached, and the ignition switch to the ON position the seat belt warning lamp lights should be lit continuously, it was 6 seconds.

However, the check ride after Passenger seats.

Seat Belt Buckle Switch (BS) Components and components location
Components ...

Brake System
...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Front Bumper Cover Components and components location
Component Location 1. Front bumper cover ...

Kia Niro (DE HEV) Owners Manual: Maintenance Under Severe Usage Conditions - For Gasoline Engine
Maintenance operation I : Inspect and if necessary, adjust, correct, clean or replace. R : Replace or change. SEVERE DRIVING CONDITIONS A : Repeatedly driving short distance of less than 8 km (5miles) in normal temperature or less than 16 km (10 miles) in freezing temperature. B : Extensi ...

© 2016-2024 www.kniro.net