Kia Niro: SRSCM / Seat Belt Buckle Switch (BS) Description and operation
| Description |
The SRSCM shall monitor the status of the driver and front passenger seat belt buckle. The SRSCM provides one pin each for the driver and front passenger seat belt buckle status input. The seat belt buckle circuit operates from internal boost voltage supplied by the SRSCM, and uses chassis ground for the signal return. The buckle status shall modify the SRSCM deployment. If the buckle status is unbuckled, the corresponding pretensioner will not be deactivated.
Side Impact Sensor (SIS) Repair procedures
Removal
Pressure side impact
sensor (P-SIS)
1.
Disconnect the battery negative terminal, and wait for at least thirty
seconds before beginning work.
...
Other information:
Kia Niro 2017 (DE HEV) Service Manual: Troubleshooting
Troubleshooting
Symptom
Possible cause
Remedy
Hard steering
Improper front wheel alignment
Excessive turning resistance of lower arm ball joint
Low tire pressure
No power assist
Correct
Replac ...
Kia Niro 2017 (DE HEV) Service Manual: Input Speed Sensor Description and operation
Description
•
The input shaft speed sensor is important in that it detects the input
shaft RPM and sends this information to the Transmission Control Module
(TCM).
•
This data is necessary for all operations including feedback control ...
