WARNING
Prior to working on the Interior lamps, ensure that the “OFF” button is depressed to avoid burning your fingers or receiving an electric shock.
1. Using a flat-blade screwdriver, gently pry the lens cover from lamp housing.
2. Remove the bulb by pulling it straight out.
3. Install a new bulb in the socket.
4. Align the lens cover tabs with the lamp housing notches and snap the lens into place.
CAUTION
Be careful not to dirty or damage the lens, lens tab, and plastic housings.
Kia Niro 2017 (DE HEV) Service Manual: Oil Level Gauge & Pipe Repair procedures
Removal and Installation
1.
Remove the oil level gauge (A).
2.
Remove the timing chain cover.
(Refer to Timing System - "Timing Chain Cover")
3.
Remove the Oil level gauge pipe (A).
...
Kia Niro 2017 (DE HEV) Service Manual: Rear Washer Switch Repair procedures
Inspection
Multifunction Switch
Inspection
1.
Check for continuity between the terminals in each switch position as
shown below.
[Left Handle
Drive]
Switch
Switch position
Switch terminal
...