Kia Niro: Body Side Molding / Roof Rack Repair procedures

Replacement
  

Put on gloves to protect your hands.

  

Use a plastic panel removal tool to remove interior trim pieces without marring the surface.

Be careful not to bend or scratch the trim and panels.

1.

Remove the roof rack front cover and rear cover (A).

2.

Remove the roof rack cap (A).

3.

Remove the roof rack assembly (A) after loosening the nuts.

Tightening torque :

3.9 - 4.4 N·m (0.4 - 0.45 kgf·m, 2.9 - 3.3 lb·ft)

4.

Install in the reverse order of removal.

  

Replace any damaged clips..

Body Side Molding
...

Rear Spoiler Repair procedures
Replacement    Put on gloves to protect your hands.    ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Rear Back Armrest Repair procedures
Replacement    Put on gloves to protect your hands.    • Use a plastic panel removal tool to remove interior trim pie ...

Kia Niro 2017 (DE HEV) Service Manual: Room Lamp Repair procedures
Removal    • Put on gloves to prevent hand injuries. • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tool ...

© 2016-2024 www.kniro.net