Peugeot 2008: Practical information / Roof bars

Peugeot 2008. Roof bars As a safety measure and to avoid damaging the roof, it is essential to use the transverse bars approved for the vehicle.

Observe the instructions on fitting and use contained in the guide supplied with the roof bars.

Peugeot 2008. Roof bars Maximum load distributed over the roof bars, for a loading height not exceeding 40 cm: 70  kg.

As this value may change, please verify the maximum load quoted in the guide supplied with the roof bars.

If the height exceeds 40 cm, adapt the speed of the vehicle to the profile of the road to avoid damaging the roof bars and the fixings on the vehicle.

Be sure to refer to national legislation in order to comply with the regulations for transporting objects that are longer than the vehicle.

Peugeot 2008. Roof bars Recommendations

Distribute the load uniformly, taking care to avoid overloading one of the sides.

Arrange the heaviest part of the load as close as possible to the roof.

Secure the load securely.

Drive gently: the vehicle will be more susceptible to the effects of side winds and its stability may be affected.

Regularly check the security and tight fastening of the roof bars, at least before each trip.

Remove the roof bars once they are no longer needed.

Peugeot 2008. Roof bars Sunroof

Check that the load does not pass below the roof bars so that it does not impede the movements of the sunroof - risk of major damage!

Fitting on longitudinal bars

Peugeot 2008. Roof bars

The transverse bars must be fixed at the engraved markings on the longitudinal bars.

Fitting directly to the roof

Peugeot 2008. Roof bars

You must only attach the transverse bars to the four fixing points located on the roof frame.

These points are concealed by the vehicle doors when the doors are closed.

The roof bar fixings have a stud which must be inserted into the opening of each fixing point.

Towing device with quickly detachable towball
Presentation This genuine towing device can be fitted and removed with no need for tools. Carrier Protective plug Connection socket Safety eye Detachable towball Locking/unlocking wheel Secur ...

Snow chains
In wintry conditions, snow chains improve traction as well as the behaviour of the vehicle when braking. The snow chains must be fitted only to the front wheels. They must never be fitted to "spac ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Heated Oxygen Sensor (HO2S) Specifications
Specification HO2S [Bank 1/Sensor 1] (Linear) Item Specification Heater Resistance (Ω) 2.5 - 4.0 [20°C(68°F)] HO2S [Bank 1/Sensor 2] (Binary type) Item Specification ...

Kia Niro 2017 (DE HEV) Service Manual: Components and components location
Components 1. Brake disc 2. Hub assembly 3. Dust cover 4. Knuckle ...

© 2016-2022 www.kniro.net