Kia Niro: Lighting System / Rheostat Repair procedures
| Removal |
| 1. |
Disconnect the negative (-) battery terminal. |
| 2. |
Remove the crash pad lower panel. (Refer to Body - "Crash Pad Lower Panel") |
| 3. |
Remove the crash pad plate [LH] (A) after loosening the screws.
|
| 4. |
Disconnect the crash pad side switch connector (A).
|
| 5. |
Remove the crash pad side switch (A) after loosening the screws.
|
| Installation |
| 1. |
Install the crash pad side switch. |
| 2. |
Connect the crash pad side switch connector. |
| 3. |
Install the crash pad plate [LH]. |
| 4. |
Install the crash pad lower panel. |
| 5. |
Connect the negative (-) battery terminal. |
| Inspection |
| 1. |
Check for intensity of new rheostat switch. If the light intensity of the lamps changes smoothly without any flickering when the rheostat is turned, it can be assumed that the rheostat is normal.
|
Rheostat Components and components location
Components
...
Front Fog Lamps Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front bumper cover.
(Refer to Body - "Front Bumper Cover")
...
Other information:
Kia Niro 2017 (DE HEV) Service Manual: Front Wiper Motor Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
If necessary, release the wiper blade fixing clip by pulling up and remove
the wiper blade from the inside radius (A) of wiper arm.
3.
Remove the co ...
Kia Niro 2017 (DE HEV) Service Manual: Center Fascia Panel Repair procedures
Replacement
Put on gloves to protect your hands.
•
Use a plastic panel removal tool to remove interior trim pie ...
