Kia Niro: Lighting System / Rheostat Components and components location
| Components |
Hazard Lamp Switch Repair procedures
Inspection
1.
Check for continuity between terminals. If the continuity is not as specified,
replace the hazard lamp switch.
[Audio Type]
Connector Pin
...
Rheostat Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad lower panel.
(Refer to Body - "Crash Pad Lower Panel&quo ...
Other information:
Kia Niro 2017 (DE HEV) Service Manual: Description and operation
Description
The high voltage battery system consists of the BMS ECU (Battery Management System
ECU), Power Relay Assembly (PRA), safety plug, battery temperature sensor, and battery
ambient sensor. Especially the BMS ECU controls SOC (State Of Charge), power, cell
balancing, cooli ...
Kia Niro 2017 (DE HEV) Service Manual: SRS Control Module (SRSCM) Description and operation
Description
The primary purpose of the SRSCM (Supplemental Restraints System Control Module)
is to determine between an event that warrants restraint system deployment and an
event that does not. The SRSCM must decide whether to deploy the restraint system
or not. After determinin ...
