Kia Niro: Cooling System / Reservoir Tank Repair procedures

Removal and Installation
1.

Drain the coolant.

(Refer to Cooling System - "Coolant")

2.

Disconnect the radiator reservoir hose (A).

3.

Disconnect the reservoir hose (B).

4.

Remove the reservoir tank (C).

Tightening torque :

7.8 - 11.8 N·m (0.8 - 1.2 kgf·m, 5.8 - 8.7 lb·ft)

5.

Install in the reverse order of removal.

6.

Fill the coolant.

(Refer to Cooling System - "Coolant")

Radiator Repair procedures
Removal and Installation 1. Disconnect the negative battery terminal. 2. Remove the air cleaner. (Refer to Intake and Exhaust System - "A ...

Water pump Repair procedures
Removal    • Be sure to read and follow the “General Safety Information and Caution” ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Hood Insulator Pad Repair procedures
Replacement 1. Using a clip remover, detach the clips, and remove the hood insulator pad (A).    Be careful not to damage the hood and body. ...

Kia Niro 2017 (DE HEV) Service Manual: Specifications
Specifications Dual Clutch Transmission Transmission model D6KF1 Engine model Gasoline 1.6 Clutch Type Dry dual plate Transmission oil Capacity 1.6 - 1.7 L ...

© 2016-2024 www.kniro.net