Removal |
1. |
Remove the front bumper cover. (Refer to Body - "Front Bumper Cover") |
2. |
After loosening each mounting bolt of the low-pitch horn (A) and high-pitch horn (B), detach the connector (C) and remove the horn.
|
Installation |
1. |
After connecting the horn connectors, install both high-pitch and low-pitch horns. |
2. |
Install the front bumper cover. |
Inspection |
1. |
The relay on the horn of this vehicle is implanted into the metal core block PCB of the engine room relay block. |
The semi-conductor type relay inserted in the PCB is impossible to replace. If the relay needs to be replaced, replace the metal core box and conduct a test on it. |
Kia Niro (DE HEV) Owners Manual: Operating conditions
The indicator on the switch will illuminate when the Blind spot detection system
switch is pressed with the ignition switch ON. If the vehicle speed exceeds 30 km/h
(18.6 mph), the system will activate.
If you press the switch again, the switch indicator and system will be turned
off.
If t ...
Kia Niro (DE HEV) Owners Manual: To set cruise control speed
1. Press the CRUISE / button on the
steering wheel, to turn the system on. The cruise indicator light will illuminate.
2. Accelerate to the desired speed, which must be more than approximately 30
km/h (20 mph).
3. Move the lever down (to SET-), and release it at the desired speed. The cru ...