Kia Niro: Quarter Fixed Glass / Repair procedures

Replacement
  

Put on gloves to protect your hands.

  

Use a plastic panel removal tool to remove interior trim pieces without marring the surface.

1.

Remove the rear pillar trim.

(Refer to Interior Trim - "Rear Pillar Trim")

2.

Loosen the quarter fixed glass (A) mounting nuts.

Tightening torque :

3.9 - 4.4 N·m (0.4 - 0.45 kgf·m, 2.9 - 3.3 lb·ft)

  

Tighten mounting nuts in the order of ? > ? > ? > ?.

3.

Remove the quarter fixed glass (A).

4.

Install in the reverse order of removal.

  

Replace any damaged clips.

Components and components location
Component Location 1. Quarter fixed glass ...

Rear Bumper
...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Components and components location
Component Location 1. BMS ECU 2. Safety Plug 3. Main Relay (+) 4. Main Relay (-) 5. Pre Charge Relay 6. Pre-Charge Resistor 7. Battery Current Sensor 8. Main Fuse [Safety Plug] 9. Battery Temperature Sensor 10. Battery Inlet T ...

Kia Niro (DE HEV) Owners Manual: Check tire pressure
You can check the tire pressure in the information mode on the cluster. - Refer to “User settings mode” in chapter 4. Tire pressure is displayed 1~2 minutes later after driving. If tire pressure is not displayed when the vehicle is stopped, “Drive to display” message displays. ...

© 2016-2023 www.kniro.net