Kia Niro: Fuel Filler Door / Repair procedures

Replacement
  

Use a plastic panel removal tool to remove interior trim pieces without marring the surface.

1.

Open the fuel filler door and then filler door cap.

2.

Remove the fuel filler door packing (A) after loosening the mounting bolts.

3.

Remove the fuel filler door release actuator fixed pin (A).

4.

Remove the fuel filler door housing (A).

5.

Install in the reverse order of removal.

  

Make sure the fuel filler door locks/unlocks and opens/closes properly.

Replace any damaged clips.

Components and components location
Component Location 1. Fuel filler door ...

Front Seat
...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Heated Oxygen Sensor (HO2S) Description and operation
Description Heated Oxygen Sensor (HO2S), consisting of zirconium and alumina, is installed on both upstream and downstream of the Manifold Catalytic Converter (MCC) to detect the air/fuel ratio and send it to the ECM. The sensor output voltage varies in accordance with the air/fue ...

Kia Niro 2017 (DE HEV) Service Manual: Knock Sensor (KS) Repair procedures
Removal 1. Switch "OFF" the ignition and disconnect the negative (-) battery terminal. 2. Remove the intake manifold. (Refer to Engine Mechanical System - “Intanke Manifold”) 3. Remove the installat ...

© 2016-2023 www.kniro.net