Kia Niro: Cowl Top Cover / Repair procedures

Kia Niro 2017 (DE HEV) Service Manual / Body (Interior and Exterior) / Cowl Top Cover / Repair procedures

Replacement

Put on gloves to protect your hands.

•	Use a plastic panel removal tool to remove interior trim pieces without marring the surface.

•	Be careful not to bend or scratch the trim and panels.

Remove the cap (A) and the nuts (B), and then remove the wiper arm (C).

Tightening torque :

22.6 - 26.5 N·m(2.3 - 2.7 kgf·m, 16.6 - 19.5 lb·ft)

2.	Disconnect the nozzle hose (A).

3.	Detach the clips, then remove the cowl top cover (A).

Install in the reverse order of removal.

Replace any damaged clips.

Components and components location

Component Location 1. Cowl top cover ...

Crash Pad

...

Other information:

Kia Niro (DE HEV) Owners Manual: Engine coolant
Check the condition and connections of all cooling system hoses and heater hoses. Replace any swollen or deteriorated hoses. The coolant level should be filled between MAX and MIN marks on the side of the coolant reservoir when the engine is cool. If the coolant level is low, add enough spec ...

Kia Niro 2017 (DE HEV) Service Manual: BMS ECU Repair procedures
Removal • Be sure to read and follow the “General Safety Information and Caution” before doing any work related with the high voltage system. Failure to follow the safety instr ...