Kia Niro: Crankcase Emission Control System / Repair procedures

Inspection
1.

After disconnecting the vapor hose from the PCV valve, remove the PCV valve.

2.

Reconnect the PCV valve to the vapor hose.

3.

Run the engine at idle, then put a finger over the open end of the PCV valve and make sure that intake manifold vacuum can be felt.

  

The plunger inside the PCV valve will move back and forth in vacuum.

4.

If the vacuum is not felt, inspect PCV operation. If operating correctly, clean or replace the vapor hose.

Schematic diagrams
Schematic Diagram ...

Positive Crankcase Ventilation (PCV) Valve Description and operation
Operation Principle ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Description and operation
System Configuration PAS consists of 8 sensors (4 in the front and 4 in the rear) that are used to detect obstacles and transmit the result in three separate warning levels, the first, second and third to IPM (BCM) via LIN communication. IPM (BCM) decides the alarm level by the tr ...

Kia Niro 2017 (DE HEV) Service Manual: General information
General Troubleshooting Information Before Troubleshooting 1. Check applicable fuses in the appropriate fuse/relay box. 2. Check the battery for damage, state of charge, cleanliness and tight connections. (Refer to Engine Electrical ...

© 2016-2024 www.kniro.net