Kia Niro: If you have a flat tire (with spare tire) / Removing and storing the spare tire

Turn the tire hold-down wing bolt counterclockwise.

Store the tire in the reverse order of removal.

To prevent the spare tire and tools from “rattling” while the vehicle is in motion, store them properly.

If it is hard to loosen the tire holddown wing bolt by hand, you can loosen it easily using the jack handle.

1. Put the jack handle (1) inside of the tire hold-down wing bolt.

2. Turn the tire hold-down wing bolt counterclockwise with the jack handle.

WARNING

Ensure the spare tire retainer is properly aligned with the center of the spare tire to prevent the spare tire from “rattling”.

Otherwise, it may cause the spare tire to fall off the carrier and lead to an accident.

Jacking instructions
The jack is provided for emergency tire changing only. To prevent the jack from “rattling” while the vehicle is in motion, store it properly. Follow jacking instructions to reduce the possibil ...

Changing tires
1. Park on a level surface and apply the parking brake firmly. 2. Shift the shift lever into P (Park) with dual clutch transmission. 3. Activate the hazard warning flasher. 4. Remove the wheel ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Heater Unit Repair procedures
Replacement    When prying with a flat-tip screwdriver or a prying trim tool, wrap a protective tape around the related parts and the tool to prevent damage. 1. Disconnect the negative (- ...

Kia Niro 2017 (DE HEV) Service Manual: Smart Cruise Control (SCC) ECU Repair procedures
Removal 1. Remove the front bumper. (Refer to Body - "Front Bumper Cover") 2. Disconnect the SCC radar & unit connector (A). 3. Remove the SCC radar & ECU (B) after loosening the mounting bolts. ...

© 2016-2024 www.kniro.net