Kia Niro: Towing / Removable towing hook
■ Front
■ Rear
1. Open the tailgate, and remove the towing hook from the tool case.
2. Remove the hole cover pressing the upper (front) / lower (rear) part of the cover on the bumper.
3. Install the towing hook by turning it clockwise into the hole until it is fully secured.
4. Remove the towing hook and install the cover after use.
Towing service
If emergency towing is necessary, we recommend having it done by an authorized
Kia dealer or a commercial tow-truck service. Proper lifting and towing procedures
are necessary to prevent damage ...
Emergency towing
■ Front
■ Rear
If towing is necessary, we recommend you to have it done by an authorized Kia
dealer or a commercial tow truck service.
If towing service is not available in an emergency, ...
Other information:
Kia Niro (DE HEV) Owners Manual: LKAS activation
The LKAS screen will appear on the LCD display if the system is activated.
When both lanes are detected and all the conditions to activate the LKAS
are satisfied, the steering wheel will be controlled (green steering wheel indicator
will illuminate).
WARNING
The Lane Keeping Assist ...
Kia Niro 2017 (DE HEV) Service Manual: Knock Sensor (KS) Description and operation
Description
Knocking is a phenomenon characterized by undesirable vibration and noise that
can cause engine damage. Knock Sensor (KS) is installed on the cylinder block and
senses engine knocking.
When knocking occurs, the vibration from the cylinder block is applied as pressure
...
