To release the parking brake, depress the parking brake pedal a second time while applying the foot brake. The pedal will automatically extend to the fully released position.
WARNING
Check the brake warning light by pressing engine start/stop button switch ON (do not start the engine). This light will be illuminated when the parking brake is applied with the engine start/stop button switch in the START or ON position.
Before driving, be sure the parking brake is fully released and the brake warning light is off.
If the brake warning light remains on after the parking brake is released while the engine is running, there may be a malfunction in the brake system. Immediate attention is necessary.
If at all possible, cease driving the vehicle immediately. If that is not possible, use extreme caution while operating the vehicle and only continue to drive the vehicle until you can reach a safe location or repair shop.
Kia Niro (DE HEV) Owners Manual: When the hybrid vehicle shuts off
When the high voltage battery or 12- volt battery discharges, or fuel tank is
empty, the hybrid system may not operate.
If the Hybrid system stops operating while the vehicle is moving, reduce the
vehicle speed gradually. Pull your vehicle off the road in a safe area, and shift
the transmissi ...
Kia Niro 2017 (DE HEV) Service Manual: Clutch Actuator Assembly Components and components location
Components
1. Fork cover
2. Clutch actuator assembly
3. Extension connector
4. Motor 1 (Odd)
5. Motor 2 (Even)
...