Kia Niro: Assist emergency braking (AEB) / Recognizing pedestrians

- The pedestrian is not fully captured by the camera sensor, or the pedestrian does not walk in the upright position.
- The pedestrian moves very fast.
- The pedestrian abruptly appears in front.
- The pedestrian wears clothes in the color similar to the background.
- The outside is too bright or too dark.
- The vehicle drives at night or in the darkness.
- There is an item similar to a person’s body structure.
- The pedestrian is small.
- The pedestrian has impaired mobility.
- It is difficult to distinguish the pedestrian from the surroundings.
- The sensor recognition is limited.
- There is a group of pedestrians.

WARNING

✽ NOTICE

The system may temporarily cancel due to the strong electric waves.

Recognizing vehicles
- The radar or the camera is contaminated with foreign substances. - It heavily rains or snows. - There is interruption by electric waves. - There is severe irregular reflection from the radar. - ...

Cruise Control system
■ Type A ■ Type B 1. Cruise indicator 2. Cruise set indicator The cruise control system allows you to program the vehicle to maintain a constant speed without pressing the accelerator pe ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Components and components location
Component Location 1. Body Control Module (BCM) 2. Ultrasonic sensor    Front/rear parking assist control unit function is built into the Body Control Module (BCM). ...

Kia Niro 2017 (DE HEV) Service Manual: Camshaft Position Sensor (CMPS) Troubleshooting
Signal Waveform This example shows a typical Crankshaft Position Sensor (CKPS) and Camshaft Position Sensor (CMPS) waveforms at idle. The PCM controls the injection and ignition timing by using these signals. Generally, the CKPS signal is used to detect the piston position whe ...

© 2016-2022 www.kniro.net