Kia Niro: Blade replacement / Rear window wiper blade
1. Raise the wiper arm and pull out the wiper blade assembly.
2. Install the new blade assembly by inserting the center part into the slot in the wiper arm until it clicks into place.
3. Make sure the blade assembly is installed firmly by trying to pull it slightly.
To prevent damage to the wiper arms or other components, we recommend that the wiper blade be replaced by an authorized Kia dealer.
Front windshield wiper blade
Type A
1. Raise the wiper arm and turn the wiper blade assembly to expose the plastic
locking clip.
CAUTION
Do not allow the wiper arm to fall against the windshield, since it may chip
or cra ...
Battery
...
Other information:
Kia Niro 2017 (DE HEV) Service Manual: Troubleshooting
Troubleshooting
Trouble symptom
Probable cause
Remedy
Warning lamp ""E"" is illuminated(Driving is only possible with 1/R gear)
DCT learning not performed
Perform the DCT manual learnin ...
Kia Niro 2017 (DE HEV) Service Manual: CVVT (Continuous Variable Valve Timing) System Description and operation
Description
Continuous Variable Valve Timing (CVVT) system advances or retards the valve
timing of the intake and exhaust valve in accordance with the ECM control signal
which is calculated by the engine speed and load.
By controlling CVVT, the valve overlap or underlap occurs, wh ...
