Kia Niro: Body Side Molding / Rear Wheel Guard Repair procedures

Kia Niro 2017 (DE HEV) Service Manual / Body (Interior and Exterior) / Body Side Molding / Rear Wheel Guard Repair procedures

Replacement

Put on gloves to protect your hands.

•	Use a plastic panel removal tool to remove interior trim pieces without marring the surface.

•	Be careful not to bend or scratch the trim and panels.

1.	Remove the rear tire.

2.	Remove the rear wheel guard (A), after loosening the mounting clips and nuts.

Install in the reverse order of removal.

Replace any damaged clips.

Front Wheel Guard Repair procedures

Replacement Put on gloves to protect your hands. ...

Waist Line Molding Repair procedures

Replacement Put on gloves to protect your hands. ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Headlamps Repair procedures
Inspection 1. Check the battery voltage. (Low beam will be on when the battery voltage is above 9 V.) 2. Check the fuse and relay. 3. Check the polarity of ballast. (The low beam will not light on in reverse pola ...

Kia Niro 2017 (DE HEV) Service Manual: Release residual pressure in fuel line
Release Residual Pressure in Fuel Line Whenever the high pressure fuel fuse, fuel pipe, delivery pipe, or injector is removed immediately after shutting off the engine, an injury may be caused by the relea ...