Kia Niro: Rear Suspension System / Rear Upper Arm Repair procedures

Removal
1.

Disconnect the battery negative cable.

2.

Remove the wheel and tire.

Tightening torque:

107.9 - 127.5 N·m (11.0 - 13.0 kgf·m, 79.6 - 94.0 lb·ft)

  

Be careful not to damage the wheel nuts when removing the wheel and tire.

3.

Loosen the wheel speed sensor bracket bolt (A) from the rear upper arm.

Tightening torque:

6.8 - 10.7 N·m (0.7 - 1.1 kgf·m, 5.0 - 7.9 lb·ft)

  

Set up the transmission jack under the lower arm in order to remove the shock absorber in no-load condition.

4.

Loosen the bolt from the upper arm.

Tightening torque:

137.3 - 156.9 N·m (14.0 - 16.0 kgf·m, 101.3 - 115.7 lb·ft)

5.

Loosen the upper arm bolt and then remove the upper arm.

Tightening torque:

137.3 - 156.9 N·m (14.0 - 16.0 kgf·m, 101.3 - 115.7 lb·ft)

6.

Install in the reverse order of removal.

Inspection
1.

Check the bushing for wear and deterioration.

2.

Check all bolts and nuts.

Rear Lower Arm Repair procedures
Removal 1. Disconnect the battery negative cable. 2. Remove the wheel and tire. Tightening torque: 107.9 - 127.5 N·m ( ...

Rear Stabilizer Bar Repair procedures
Removal 1. Disconnect the battery negative cable. 2. Remove the wheel and tire. Tightening torque: 107.9 - 127.5 N·m ( ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Description and operation
Description BSD is a system that uses two magnetic wave radar sensors attached on the rear panel to measure the distance from the vehicle in the back and senses and sets off (visual and auditory) alarms for any vehicle coming into the blind spot. – Blind Spot ...

Kia Niro (DE HEV) Owners Manual: Rear window wiper/washer
■ Type A ■ Type B A :Wiper speed control (front) (1) MIST/ – Single wipe (2) OFF / O – Off (3) INT / --- – Intermittent wipe AUTO* – Auto control wipe (4) LO / 1 – Low wiper speed (5) HI / 2 – High wiper speed B : Intermittent control wipe time adjustment C :Wash with b ...

© 2016-2022 www.kniro.net