Kia Niro: Rear Seat / Rear Seat Cushion Cover Repair procedures

Replacement

Put on gloves to protect your hands.

•	Use a plastic panel removal tool to remove interior trim pieces without marring the surface.

•	Be careful not to bend or scratch the trim and panels.

1.	Remove the seat assembly. (Refer to Rear Seat - "Rear Seat Assembly")

2.	Remove the rear seat cushion cover (A) after removing the hog-ring clips on the rear of seat cushion cover. [Back side] [Inside]

Install in the reverse order of removal.

•	Make sure that the connectors are plugged in properly.

•	Replace any damaged clips.

•	To prevent wrinkles, make sure that the material is stretched evenly over the cover (B) before securing the hog-ring clips (A).

•	Replace the hog-ring clips with new ones using special tool (C) (09880-4F000).

Component Location 1. Rear seat cushion cover ...

Component Location 1. Rear back armrest ...

Kia Niro 2017 (DE HEV) Service Manual: Inhibitor Switch Description and operation
Description • The inhibitor switch is installed on top of transmission, and is connected to the shift lever through shift cable. • Inhibitor switch signals (S1, S2, S3, S4) are transmitted to the TCM according to the driver's shif ...

Kia Niro 2017 (DE HEV) Service Manual: External AMP Components and components location
Components Connector Pin Information No. Connector A No. Connector B 1 Battery (+) 1 Sub woofer speaker 2 (+) 2 Battery (+) 2 ...