Kia Niro: Rear Seat Belt / Rear Seat Belt Buckle Repair procedures

Replacement
  

When installing the belt, be careful not to damage the retractor.

1.

Remove the rear seat cushion assembly.

(Refer to Rear Seat - "Rear Seat Assembly")

2.

Remove the rear seat belt buckle (A) after loosening the mounting bolt.

Tightening torque :

39.2 - 53.9 N·m (4.0 - 5.5 kgf·m, 28.9 - 39.8 lb·ft)

3.

Install in the reverse order of removal.

Rear Seat Belt Buckle Components and components location
Component Location 1. Rear seat belt buckle [RH] 2. Rear seat belt buckle [LH] ...

Roof Trim
...

Other information:

Kia Niro (DE HEV) Owners Manual: Parking Brake & Brake Fluid Warning Light
This warning light illuminates: Once you set the ignition switch or Engine Start/Stop Button to the ON position. - It illuminates for approximately 3 seconds - It remains on if the parking brake is applied. When the parking brake is applied. When the brake fluid level in the reservoir ...

Kia Niro 2017 (DE HEV) Service Manual: Power Seat Motor Repair procedures
Inspection Power Seat Motor 1. Disconnect the connectors for each motor. [Slide motor (A)] [Rear height motor (B)] [Front tilt motor (C)] [Reclining motor (D)] [Lumber support motor (E)] ...

© 2016-2023 www.kniro.net