Kia Niro: Rear Seat / Rear Seat Assembly Repair procedures

Replacement

[Rear seat cushion assembly]

1.

Remove the luggage board (A).

2.

Remove the rear seat cushion (A) after loosening the mounting bolts.

Tightening torque :

16.8 - 25.5 N·m (1.7 - 2.6 kgf·m, 12.3 - 18.8 lb·ft)

3.

Disconnect the rear seat main wiring connector (A).

4.

Install in the reverse order of removal.

  

Make sure the connector is connected properly.

[Rear seat back assembly]

1.

Remove the rear seat cushion assembly.

(Refer to Rear Seat - "Rear Seat Assembly")

2.

Remove the rear seat back (A) after loosening the mounting bolts.

Tightening torque :

16.8 - 25.5 N·m (1.7 - 2.6 kgf·m, 12.3 - 18.8 lb·ft)

3.

Install in the reverse order of removal.

Rear Seat Assembly Components and components location
Component Location 1. Rear seat cushion assembly 2. Rear seat back assembly ...

Rear Seat Back Cover Components and components location
Component Location 1. Rear seat back cover [RH] 2. Rear seat back cover [LH] ...

Other information:

Kia Niro (DE HEV) Owners Manual: Steering wheel remote control
❈ The actual features in the vehicle may differ from the illustration. (1) MUTE Press to mute audio output. (2) MODE Press the button to change the mode in the following order: Radio ➟ Media. (3) VOLUME Press to adjust the volume. (4) UP/DOWN Press the button in radio mode ...

Kia Niro 2017 (DE HEV) Service Manual: Components and components location
Component Location 1. Fender assembly ...

© 2016-2024 www.kniro.net