Replacement |
Put on gloves to protect your hands. |
|
1. |
Remove the rear door trim. (Refer to Rear Door - "Rear Door Trim") |
2. |
Remove the rear door belt inside weatherstrip (A).
|
3. |
Remove the rear door belt outside weatherstrip (A).
|
4. |
Remove the rear door delta garnish (A) after loosening the screws.
|
5. |
Loosen the rear door channel mounting bolts & nut.
|
6. |
Slightly push the rear door channel in the direction of the arrow as shown below.
|
7. |
Remove the rear door window glass mounting hole plug (A).
|
8. |
Carefully adjust the rear door window glass (A) until the bolts are visible, and then loosen them. |
9. |
Remove the window glass (B) after loosening the bolt (A).
|
10. |
Install in the reverse order of removal.
|
Kia Niro (DE HEV) Owners Manual: Distance to empty
■ Type A
■ Type B
Distance To Empty
The distance to empty is the estimated distance the vehicle can be driven
with the remaining fuel.
- Distance range: 1~9,999 km or 1~9,999 mi.
If the estimated distance is below 1 km (1 mi.), the trip computer will
display “---” as dist ...
Kia Niro 2017 (DE HEV) Service Manual: Crankshaft Position Sensor (CKPS) Troubleshooting
Signal Waveform
This example shows a typical Crankshaft Position Sensor (CKPS) and Camshaft Position
Sensor (CMPS) waveforms at idle. The PCM controls the injection and ignition timing
by using these signals.
Generally, the CKPS signal is used to detect the piston position whe ...