Kia Niro: Rear Door / Rear Door Module Repair procedures

Replacement
  

Put on gloves to protect your hands.

  

Use a plastic panel removal tool to remove interior trim pieces without marring the surface.

Be careful not to bend or scratch the trim and panels.

1.

Remove the rear door window glass.

(Refer to Rear Door - "Rear Door Window Glass")

2.

Remove the rear door channel (A) after loosening the mounting bolts and nut.

Tightening torque :

Bolt : 6.9 - 10.8 N.m (0.7 - 1.1 kgf.m, 5.1 - 8.0 lb-ft)

Nut : 3.9 - 5.9 N.m (0.4 - 0.6 kgf.m, 2.9 - 4.3 lb-ft)

3.

Disconnect the rear door main wiring connector cover (A).

4.

Disconnect the rear door main wiring connector (A).

5.

Remove the rear door module (A) after loosening the mounting bolts.

Tightening torque :

Bolt : 7.8 - 11.8 N.m (0.8 - 1.2 kgf.m, 5.8 - 8.7 lb-ft)

6.

Disconnect the rear door latch connector (A).

7.

Remove the rear door module (B) from the inside handle (A) by pulling in the direction of the arrow.

8.

Remove ther rear door main wiring (A).

9.

Remove the rear speaker.

(Refer to Body Electrical System - "Speakers")

10.

Remove the rear power window motor.

(Refer to Body Electrical System - "Power Window Motor")

11.

Install in the reverse order of removal.

  

Apply enough grease onto the whole parts.

Make sure that connectors are connected properly and each rod is connected securely.

Make sure that the door locks/unlocks and opens/closes properly.

Rear Door Module Components and components location
Component Location 1. Rear door module ...

Rear Door Outside Handle Components and components location
Component Location 1. Rear door outside handle ...

Other information:

Toyota Corolla 2019-2024 Owners Manual: If the vehicle battery is discharged
The following procedures may be used to start the engine if the vehicle’s battery is discharged. You can also call your Toyota dealer or a qualified repair shop. Restarting the engine If you have a set of jumper (or booster) cables and a second vehicle with a 12-volt battery, you can jump start ...

Peugeot 2008 2019-2024 Owner's Manual: Drive Assist Plus
Only available on versions with the EAT8 automatic gearbox and gear selector. This system automatically adjusts the speed and corrects the trajectory, using the Adaptive Cruise Control with Stop  &   Go function in conjunction with the Lane Positioning Assist. These two functions mus ...

© 2016-2024 www.kniro.net