Kia Niro: Floor Console / Rear Console Cover Repair procedures

Replacement
  

Put on gloves to protect your hands.

  

Use a plastic panel removal tool to remove interior trim pieces without marring the surface.

Be careful not to bend or scratch the trim and panels.

1.

Remove the floor console assembly.

(Refer to Floor Console - "Floor Console Assembly")

2.

Loosen the screws.

3.

Remove the rear console cover (A) by using a remover.

4.

Install in the reverse order of removal.

  

Make sure the connector is connected properly.

Replace any damaged clips.

Rear Console Cover Components and components location
Component Location 1. Rear console cover ...

Console Armrest Components and components location
Component Location 1. Console armrest ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Multimedia Jack Repair procedures
Removal Multimedia Jack    Put on gloves to protect your hands.    • When prying with a flat-tip screwdriver or use ...

Kia Niro 2017 (DE HEV) Service Manual: Description and operation
Operation 1. Cooling Fan 2. cooling duct (inlet) 3. outlet cooling duct (outlet) ...

© 2016-2024 www.kniro.net