Kia Niro: Rear Seat / Rear Back Armrest Repair procedures

Replacement
  

Put on gloves to protect your hands.

  

Use a plastic panel removal tool to remove interior trim pieces without marring the surface.

Be careful not to bend or scratch the trim and panels.

1.

Remove the rear door module.

(Refer to Rear Door - "Rear Door Module")

2.

Remove the rear back armrest (A) after loosening the cap & bolt.

3.

Remove the rear back armrest board (A) after loosening the screws.

4.

Install in the reverse order of removal.

  

Make sure that the connectors are plugged in properly.

Replace any damaged clips.

Rear Back Armrest Components and components location
Component Location 1. Rear back armrest ...

Rear Seat Belt
...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: General information
High Voltage System Motor Type Permanent magnet synchronous motor Max. Output (kW) 32 Max Torque (Nm) 170 HPCU Inverter Input Voltage(V) 200 ~ 3 ...

Kia Niro (DE HEV) Owners Manual: Stowing the rear seat belt
■ Outboard belt ■ Center belt If the center seat belt is not in use, always lock the latch plate into the buckle as above illustration. The rear seat belt buckles can be stowed in the pocket between the rear seatback and cushion when not in use. Insert the seat belt into the t ...

© 2016-2024 www.kniro.net