Kia Niro: Engine Control System / Rail Pressure Sensor (RPS) Specifications
Kia Niro 2017 (DE HEV) Service Manual / Engine Control/Fuel System / Engine Control System / Rail Pressure Sensor (RPS) Specifications
| Specification |
|
Pressure |
Output Voltage (V) [Vref=5V] |
|
|
bar |
[MPa (kgf/cm², psi)] |
|
|
0 |
0 (0, 0) |
0.5 |
|
140 |
14 (142, 2031) |
2.5 |
|
280 |
28 (286, 4061) |
4.5 |
Heated Oxygen Sensor (HO2S) Repair procedures
Inspection
1.
Switch "OFF" the ignition.
2.
Disconnect the HO2S connector.
3.
Measure resistance between the H ...
Rail Pressure Sensor (RPS) Description and operation
Description
Installed on the delivery pipe, the Rail Pressure Sensor (RPS) measures the instantaneous
fuel pressure in the delivery pipe. The sensing element (Semiconductor element)
b ...
Other information:
Kia Niro 2017 (DE HEV) Service Manual: Rear Oil Seal Repair procedures
Replacement
•
Be sure to read and follow the “General Safety Information and
Caution” before doing any work related with the high voltage system.
Failure to follow the safety i ...
Kia Niro 2017 (DE HEV) Service Manual: Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the steering wheel.
(Refer to Steering System - "Steering Wheel")
3.
Remove the steering column upper and lower shrouds after loosening the ...
© 2016-2023 www.kniro.net
