Kia Niro: Front Bumper / Radiator Grille Repair procedures

Replacement

Put on gloves to protect your hands.

•	Use a plastic panel removal tool to remove interior trim pieces without marring the surface.

•	Be careful not to bend or scratch the trim and panels.

1.	Remove the front bumper cover. (Refer to Front Bumper - "Front Bumper Cover")

2.	Remove the front bumper wiring.

3.	Remove the front bumper energy absorber (A).

4.	Loosen the mounting screws and remove the radiator grille upper cover (A).

5.	Remove the front bumper radiator grille (A) after loosening the screws.

Install in the reverse order of removal.

•	Make sure the connector is connected properly.

•	Replace any damaged clips.

Component Location 1. Radiator Grille ...

...

Kia Niro 2017 (DE HEV) Service Manual: Knock Sensor (KS) Repair procedures
Removal 1. Switch "OFF" the ignition and disconnect the negative (-) battery terminal. 2. Remove the intake manifold. (Refer to Engine Mechanical System - “Intanke Manifold”) 3. Remove the installat ...