Kia Niro: Vehicle to vehicle distance setting / Radar to detect distance to the vehicle ahead

The sensor detects the distance to the vehicle ahead.

If the sensor is covered with dirt or other foreign matter, the vehicle to vehicle distance control may not operate correctly.

Always keep the area in front of the sensor clean.

To set vehicle to vehicle distance
This function allows you to program the vehicle to maintain relative distance to the vehicle ahead without depressing the accelerator pedal or brake pedal. The vehicle to vehicle distance will au ...

Radar check message
If the radar or cover is dirty or obscured with foreign matter such as snow, this message (“Smart Cruise Control disabled temporarily”) will appear and it will disappear after for a while. In ...

Other information:

Kia Niro (DE HEV) Owners Manual: Rear window wiper and washer switch
■ Type A ■ Type B The rear window wiper and washer switch is located at the end of the wiper and washer switch lever. Turn the switch to the desired position to operate the rear wiper and washer. (1) HI / - Normal wiper operation (2) LO / --- - Intermittent wiper operation (if equip ...

Kia Niro 2017 (DE HEV) Service Manual: Crankshaft Position Sensor (CKPS) Troubleshooting
Signal Waveform This example shows a typical Crankshaft Position Sensor (CKPS) and Camshaft Position Sensor (CMPS) waveforms at idle. The PCM controls the injection and ignition timing by using these signals. Generally, the CKPS signal is used to detect the piston position whe ...

© 2016-2024 www.kniro.net