Kia Niro: Engine Control System / Purge Control Solenoid Valve (PCSV) Repair procedures

Kia Niro 2017 (DE HEV) Service Manual / Engine Control/Fuel System / Engine Control System / Purge Control Solenoid Valve (PCSV) Repair procedures

Inspection
1.

Switch "OFF" the ignition.

2.

Disconnect the PCSV connector.

3.

Measure resistance between the PCSV terminals 1 and 2.

4.

Check that the resistance is within the specification.

Specification: 14.3 - 14.7 Ω [20°C(68°F)]

Removal
1.

Switch "OFF" the ignition and disconnect the negative (-) battery terminal.

2.

Remove the air cleaner assembly.

(Refer to Engine Mechanical System - "Air Cleaner")

3.

Disconnect the purge control solenoid valve connector (A).

4.

Disconnect the vapor hoses (B) from the purge control solenoid valve.

5.

Remove the purge control solenoid valve.

Installation
  

Note that internal damage may occur when the component is dropped. If the component has been dropped, inspect before installing.

Use care to keep foreign material out of the valve.

1.

Install in the reverse order of removal.

Purge Control Solenoid Valve (PCSV) Schematic diagrams
Circuit Diagram Harness Connector ...

Variable Force Solenoid (VFS) Description and operation
Description Continuous Variable Valve Timing (CVVT) system advances or retards the valve timing of the intake and exhaust valve in accordance with the ECM control signal which is calc ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Tailgate Latch Components and components location
Component Location 1. Tailgate latch assembly ...

Kia Niro (DE HEV) Owners Manual: Larger children
Children who are too large for child restraint systems should always occupy the rear seat and use the available lap/shoulder belts. The lap portion should be fastened and snugged on the hips and as low as possible. Check if the belt fits periodically. A child's squirming could put the belt ...

© 2016-2022 www.kniro.net