Kia Niro: System setting and activation / Prerequisite for activation
The AEB gets ready to be activated, when the AEB is selected on the LCD display, and when the following prerequisites are satisfied.
- The ESC is activated.
- The driving speed is over 10km/h. (However, AEB is activated within certain driving
speed.)
- When recognizing the vehicle or the pedestrian in front. (However, AEB does not
activate according to conditions in front and vehicle systems, but it notices only
certain warnings.)
WARNING
- The AEB automatically activates upon placing the ignition switch to the ON position. The driver can deactivate the AEB by canceling the system setting on the LCD display.
- The AEB automatically deactivates upon canceling the ESC. When the ESC is canceled, the AEB cannot be activated on the LCD display.
- Set or cancel AEB with controlling switches on steering wheel after stopping the vehicle in the safe place for your safety.
System setting
The driver can activate the AEB by placing the ignition switch to the ON position
and by selecting 'User Settings', 'Driving Assist', and 'Assist Emergency Braking'.
The AE ...
AEB warning message and system control
The AEB produces warning messages and warning alarms in accordance with the collision
risk levels of followings like vehicle’s sudden braking in front or lack of vehicle
to vehicle distance or c ...
Other information:
Kia Niro 2017 (DE HEV) Service Manual: Steering Column Shroud Panel Repair procedures
Replacement
Put on gloves to protect your hands.
•
Use a plastic panel removal tool to remove interior trim pie ...
Kia Niro (DE HEV) Owners Manual: Scheduled maintenance service precaution
Follow the Normal Maintenance Schedule if the vehicle is usually operated where
none of the following conditions apply. If any of the following conditions apply,
follow the Maintenance Under Severe Usage Conditions.
Repeated driving short distance of less than 8 km (5 miles) in normal temper ...
