Kia Niro: High Voltage Battery Control System / Pre-Charge Resistor Schematic diagrams

Circuit Diagram

[B03-C] (Relay Control)

[B03-S] (Relay Control)

Pre-Charge Resistor Description and operation
Description Built into the Power Relay Assembly (PRA), the Pre-Charge Resistor protects the high voltage circuit by limiting the current while the inverter capacitor is being charged. ...

Pre-Charge Resistor Repair procedures
Removal    • Be sure to read and follow the “General Safety Information and Caution” ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Fuel Pressure Regulator Repair procedures
Removal 1. Remove the fuel pump. (Refer to Fuel Delivery System - "Fuel Pump") 2. Disconnect the fuel pump motor connector (A) and fuel sender connector (B). 3. Lift the fixing hook (A) by using ...

Kia Niro 2017 (DE HEV) Service Manual: Brake/Clutch Fluid Repair procedures
Inspection Check the brake fluid level in the brake fluid reservoir. The level should be between “MIN” and “MAX” marks on the side of the reservoir. Use only hydraulic brake fluid conforming to DOT 3 or DOT 4 specification. Check the brake system for any leakage if th ...

© 2016-2024 www.kniro.net