Kia Niro: High Voltage Battery Control System / Pre-Charge Resistor Description and operation

Description

Built into the Power Relay Assembly (PRA), the Pre-Charge Resistor protects the high voltage circuit by limiting the current while the inverter capacitor is being charged.

1. High Voltage Power Terminal (-)
2. High Voltage Power Terminal (+)
3. Battery Current Sensor
4. Inverter Power Terminal (-)
5. Inverter Power Terminal (+)
6. Pre-Charge Resistor
7. Main Relay (+)
8. Pre-Charge Relay
9. Main Relay (-)
10. Power Relay Assembly Connector (Battery current sensor signal input)
11. Power Relay Assembly Connector (Main relay control)

Pre-Charge Resistor Specifications
Specification Item Specification Resistance (Ω) 40 [20°C (68°F)] Rated power (W) 40 ...

Pre-Charge Resistor Schematic diagrams
Circuit Diagram [B03-C] (Relay Control) [B03-S] (Relay Control) ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Drive Shafts and Boots Repair procedures
Inspection 1. Check the drive shaft boots for loose clamps, cracks, grease leaks, kinks or damage. ...

Kia Niro (DE HEV) Owners Manual: Heated steering wheel
With the ignition switch in the ON position or engine start/stop button in the ON position, pressing the heated steering wheel button warms the steering wheel. The indicator on the button will illuminate. To turn the heated steering wheel off, press the button once again. The indicator on t ...

© 2016-2022 www.kniro.net