Inspection |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the front door quadrant inner cover (A).
|
3. |
Disconnect the power door mirror connector from the harness.
|
4. |
Apply battery voltage to each terminal as shown in the table and verify that the mirror operates properly. [Mirror Control (LH/RT)]
[BSD Indicator]
[Mirror Heater]
[Side Repeater Lamp]
[Mirror Folding Motor]
|
Kia Niro (DE HEV) Owners Manual: Rear parking assist system precautions
The rear parking assist system may not sound consistently depending on the
speed and shapes of the objects detected.
The rear parking assist system may malfunction if the vehicle bumper height
or sensor installation has been modified or damaged. Any non-factory installed
equipment or a ...
Kia Niro 2017 (DE HEV) Service Manual: High voltage shut-off procedures
High Voltage Shut-off Procedures
•
Be sure to read and follow the “General Safety Information and
Caution” before doing any work related with the high voltage system.
Failure t ...