Kia Niro: Air Conditioning System / Photo Sensor Repair procedures
| Inspection |
| 1. |
Switch "ON" the ignition. |
| 2. |
Connect the KDS/GDS. |
| 3. |
Emit intensive light toward the photo sensor using a lamp, and check the change in output voltage. |
| 4. |
The voltage will rise with higher intensive light and fall with lower intensive light.
|
| Replacement |
| 1. |
Disconnect the negative (-) battery terminal. |
| 2. |
By using a screw driver or a remover, and remove the photo-sensor (A) and remove the connector (B).
|
| 3. |
Install in the reverse order of removal. |
Photo Sensor Description and operation
Description
The photo sensor is located at the center of the defrost nozzles.
The photo sensor contains a photovoltaic (sensitive to sunlight) diode. The solar
radiation received by ...
Ambient Temperature Sensor Description and operation
Description
Located at the front of the condenser, the ambient temperature sensor detects
the ambient air temperature. It is a negative type thermistor; resistance will increase
at lo ...
Other information:
Kia Niro 2017 (DE HEV) Service Manual: General safety information and caution
Safety Precaution
Precautions to take before servicing
high voltage system
Since hybrid vehicles contain a high voltage battery, if the
high voltage system o ...
Kia Niro 2017 (DE HEV) Service Manual: Sunroof Motor Repair procedures
Inspection
1.
Disconnect the negative (-) battery terminal.
2.
Remove the roof trim assembly.
(Refer to Body - "Roof Trim Assembly")
3.
Remove the glass motor (A) after loosening the mounting screws.
...
